Dr. Bharadwaj Nanda
Associate Professor
Ph.D.
Experience : 10 Years
Department of Civil Engineering, CUPGS, BPUT Rourkela
cupgs.bnanda@bput.ac.in
+91 96 924 1826
1. B. Nanda, J. Mishra, S.K. Patro (2024). "Synthesis of Rice Husk Ash based Alkaline Activators for Geopolymer Binder Systems: A Review." Journal of Building Engineering, Vol. 91, pp. 109694: 1-24. https://doi.org/10.1016/j.jobe.2024.109694.
2. J. Mishra, B. Nanda, S.K. Patro, R.S. Krishna (2024). "A comprehensive review on compressive strength and microstructure properties of GGBS-based geopolymer binder systems." Journal of Construction and Building Materials, Vol. 417, pp. 135242:1- 19. https://doi.org/10.1016/j.conbuildmat.2024.135242.
3. B. Dutta, A.N. Nayak, S. Dirar, B. Nanda, M. Theofanous (2023). "Nonlinear finite element investigation on shear behaviour of simply supported and continuous RC T-beams retrofitted with deep embedded CFRP/steel bars." Canadian Journal of Civil Engineering, Vol. 51, No. 3, pp. 281-297. https://doi.org/10.1139/cjce-2022-0267.
4. B. Dutta, A.N. Nayak, S. Dirar, B. Nanda, M. Theofanous (2023). "Shear strengthening of continuous RC T-beams with deep embedded CFRP and steel bars: A numerical study." Structures, Vol. 52, pp. 187-204. https://doi.org/10.1016/j.istruc.2023.03.157.
5. J. Mishra, B. Nanda, S.K. Patro, R.S. Krishna (2022). "Sustainable Fly Ash Based Geopolymer Binders: A Review on Compressive Strength and Microstructure Properties." Sustainability, Vol. 14, No. 22, pp. 15062:1-41. https://doi.org/10.3390/su142215062.
6. J. Mishra, B. Nanda, S.K. Patro, S.K. Das, S.M. Mustakim (2022). "Influence of ferrochrome ash on mechanical and microstructure properties of ambient cured fly ash based geopolymer concrete." Journal of Material Cycles and Waste Management. Vol. 24, No. 3, pp. 1095-1108. https://doi.org/10.1007/s10163-022-01381-1.
7. S.S. Mohapatro, J. Mishra, B. Nanda, S.K. Patro (2022). "A review on waste-derived alkali activators for preparation of geopolymer composite." Materials Today: Proceedings, Vol. 56, No. 1, pp. 440-446. https://doi.org/10.1016/j.matpr.2022.01.400.
8. B. Dutta, A.N. Nayak, B. Nanda, S. Dirar (2022). "Reinforced concrete deep beam shear retrofitted with deep embedded bar: a numerical investigation." Materials Today: Proceedings, Vol. 60, No. 1, pp. 281-287. https://doi.org/10.1016/j.matpr.2021.12.563.
9. J. Mishra, B. Nanda, S.K. Patro, S.K. Das, S.M. Mustakim (2022), "Strength and microstructural characterization of ferrochrome ash and ground granulated blast furnace slag based geopolymer concrete." Journal of Sustainable Metallurgy, Vol.8, pp. 156-169. https://doi.org/10.1007/s40831-021-00469-6.
10. J. Mishra, B. Nanda, S.K. Patro (2021), "Geopolymer composites for smart and sustainable infrastructure: A review." NICMAR Journal of Construction Management, Vol. 36, No. 4, pp. 50-57.
11. R.S. Krishna, J Mishra, B. Nanda, S.K. Patro, A. Adetayo, T.S. Qureshi (2021), "The role of graphene and its derivatives in modifying different phases of geopolymer composites: A review." Construction and Building Materials, Vol. 306, 124774, pp. 1-21. https://doi.org/10.1016/j.conbuildmat.2021.124774
12. B. Nanda, S. Rout (2021), "Properties of concrete containing fly ash and bottom ash mixture as fine aggregate." International Journal of Sustainable Engineering, Vol. 14, No. 4, pp. 809-819. https://doi.org/10.1080/19397038.2021.1920641
13. B. Nanda, D. Maity, D.K. Maity (2021). "Element damage assessment in semi rigid connected structures using modal domain data." International Journal of Structural Engineering , Vol. 11, No. 1, pp. 44-62. https://doi.org/10.1504/IJSTRUCTE.2021.112092
14. S. Upadhyaya, B. Nanda, R. Panigrahi (2020). "Effect of Granite Dust as Partial Replacement to Natural Sand on Strength and Ductility of Reinforced Concrete Beams." Journal of The Institution of Engineers (India): Series A, Vol. 101, pp. 669-677. https://doi.org/10.1007/s40030-020-00472-2
15. A. Majumdar, B. Nanda (2020). "A Comparative Study on Inverse Vibration Based Damage Assessment Techniques in Beam Structure Using Ant Colony Optimization and Particle Swarm Optimization." Advanced Science, Engineering and Medicine, Vol. 12, pp. 918–923.
16. J. Mishra, S.K. Das, R.S. Krishna, B. Nanda (2020). "Utilization of ferrochrome ash as a source material for production of geopolymer concrete for a cleaner sustainable environment." Indian Concrete Journal, Vol. 94, No. 7, pp. 40-49.
17. J. Mishra, S.K. Das, R.S. Krishna, B. Nanda, S.K. Patro, S.M. Mustakim (2020). "Synthesis and characterization of a new class of geopolymer binder utilizing ferrochrome ash (FCA) for sustainable industrial waste management." Materials Today: Proceedings, Vol. 33, pp. 5001-5006. https://doi.org/10.1016/j.matpr.2020.02.832.
18. A. Majumdar, B. Nanda, D. Maity, D.K. Maiti (2014). "Structural damage detection based on modal parameters using continuous ant colony optimization." Advances in Civil Engineering, Article Id. 174185, pp. 1- 14. https://doi.org/10.1155/2014/174185.
19. B. Nanda, D. Maity, D.K. Maity (2014). "Damage assessment from curvature mode shape using unified particle swarm optimization." Structural Engineering and Mechanics, Vol. 52, No. 2, pp. 307-322. http://dx.doi.org/10.12989/sem.2014.52.2.307.
20. A. Agarwal, B. Nanda, D. Maity (2014). "Experimental investigation on chemically treated bamboo reinforced concrete beams and columns." Construction and Building Materials, Vol. 71, pp. 610-617. https://doi.org/10.1016/j.conbuildmat.2014.09.011
21. B. Nanda, A. Majumdar, D. Maity, D.K. Maiti (2014). "Performance comparison among vibration based indicators in damage identification of structures." Applied Mechanics and Materials, Vol. 592, pp. 2081-2085. https://doi.org/10.4028/www.scientific.net/AMM.592-594.2081.
22. B. Nanda, D. Maity, D.K. Maity (2014), "Modal parameter based inverse approach for structural joint damage assessment using unified particle swarm optimization." Applied Mathematics and Computation, Vol. 242, pp. 407-422. https://doi.org/10.1016/j.amc.2014.05.115.
23. B. Nanda, D. Maity, D.K. Maity (2014). "Crack assessment in frame structures using modal data and unified particle swarm optimization technique." Advances in Structural Engineering, Vol. 17, No. 5, pp. 747-768. https://doi.org/10.1260%2F1369-4332.17.5.747.
24. B. Nanda, D. Maity, D.K. Maity (2012). "Vibration-based structural damage detection technique using particle swarm optimization with incremental swarm size." International Journal of Aeronautical and Space Sciences, Vol. 13, No. 3, pp. 323-331. https://doi.org/10.5139/IJASS.2012.13.3.323.
(1) B. Dutta, A.N. Nayak, B. Nanda, S. Dirar (2022), "Nonlinear FE Model for shear strengthening of Simply supported RC beams with FRP DE-bars." at: 12th Structural Engineering Convention (SEC 2022), 19-22 Dec. 2022, Malaviya National Institute of Technology, Jaipur. https://doi.org/10.38208/acp.v1.721.
(2) G.R. Patil, K.D. Singh, B. Nanda (2022), "Mitigating structural vibrations due to earthquake with application of slope bottom tuned liquid dampers." at: 12th Structural Engineering Convention (SEC 2022), 19-22 Dec. 2022, Malaviya National Institute of Technology, Jaipur. https://doi.org/10.38208/acp.v1.554.
(3) S.S. Mohapatra, J. Mishra, B. Nanda, S.K. Patro, (2022), A review on waste-derived alkali activators for preparation of geopolymer composite, at: International Conference on Materials, Machines & Information Technology (ICMMIT- 2022), 24-25 Jan. 2022.
(4) B. Dutta, A.N. Nayak, B. Nanda, S. Dirar (2021). "Reinforced concrete deep beam shear retrofitted with deep embedded bar: a numerical investigation." at: International Conference on Sustainable Materials and Practices for Built Environment (SMPBE-2021). 25-26 Nov. 2021, Jaipur, Rajasthan.
(5) R.S. Krishna, J. Mishra, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim, (2021). A Review on Potential of Graphene Reinforced Geopolymer Composites, at: International Symposium on Materials of the Millennium: Emerging Trends and Future Prospects (MMETFP-2021), 19-21 Nov. 2021, Gandhi Nagar, Gujarat.
(6) J. Mishra, B. Nanda, S.K. Patro (2020). “Geopolymer Concrete: A Pathway to Sustainable Manufacturing in the Indian Concrete Industry.”, at: 35th Indian Engineering Congress, 18-20 Dec. 2020, Institution of Engineers, Kolkata.
(7) J. Mishra, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim (2021). "Ferrochrome ash-based geopolymer concrete incorporating fly ash and lime water." at: 10th International Conference on Sustainable Waste Management towards Circular Economy (ICSWMCE- 2020) , 2-5 Dec. 2020, Jadavpur University, Kolkata.
(8) P.P. Sahu, B. Nanda, S.K. Patro (2020). "Rapid Vulnerability Assessment using Artificial Neural Network." at: International Conference on Disaster Mitigation and Management in Global Context. 7-8 Mar. 2020, The Institution of Engineers (India), Odisha state center, Bhubaneswar.
(9) S. Mishra, A. Majumdar, B. Nanda (2020)."Vibration Based Damage Assessment Technique in Beam Structures using Firefly Algorithm." at: International Conference on Aviation Technology: current scenario (AeSI-2020), 6-7 Mar. 2020, Techno Main, Saltlake, Kolkata.
(10) J. Mishra, R.S. Krishna, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim (2019). "Graphene reinforced geopolymer composites for smart and sustainable future - a meta-analytic review." at: 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), 12-14 Dec. 2019, National Institute of Technology, Rourkela.
(11) J. Mishra, S.K. Das, R.S. Krishna, B. Nanda, S.K. Patro, S.M. Mustakim (2019). "Synthesis and characterization of a new class of geopolymer binder utilizing ferrochrome ash (FCA) for sustainable industrial waste management." at: 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), 12-14 Dec. 2019, National Institute of Technology, Rourkela.
(12) J. Mishra, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim (2019). “Sustainable use of ferrochrome ash (FCA) in the production of ambient cured geopolymer concrete containing GGBFS, fly ash: An Industrial Solid Waste Management (ISWM) Strategy.” at: 9th International Conference on Sustainable Waste Management towards Circular Economy (ICSWMCE- 2019). 27-30 Nov. 2019, Kalinga Institute of Industrial Technology, Bhubaneswar.
(13) R.L. Sahu, R.R. Dash, P.K. Pradhan, B. Nanda (2019), "Prediction of turbidity removal efficiency caused by river bank filtration based on hydro-geological factors using artificial neural network", at: National conference on Trends in Mineral and Material Technology (MMT 2019). 30th Oct. 2019, Siksha 'O' Anusandhan, Bhubaneswar.
(14) B. Dutta, K. Sogut, A.N. Nayak, S. Dirar, B. Nanda, M. Theofanous, A. Faramarzi (2019). “Nonlinear Finite Element Analysis of Reinforced Concrete Beams Strengthened with Embeded Steel Bars.” at: International Conference on Advanced Composites in Construction (AICC 2019). 3-5 Sep. 2019, University of Birmingham, UK.
(15) A. Majumdar, B. Nanda (2019). “A comparative study on inverse vibration based damage assessment technique in beam structures using PSO and ACO”, at: 1st National Conference on Advances in Mechanical Engineering (NCAME 2019). 16th Mar. 2019, National Institute of Technology, Delhi.
(16) S. Upadhyaya, B. Nanda (2019). “Coconut Fibre Reinforced Concrete”, at: National Conference on Advances in Structural Technologies (COAST 2019). 1-3 Feb. 2019, National Institute of Technology, Silchar, Assam, India.
(17) G.R. Patil, K.D. Singh, B. Nanda (2018). "Performance of TLD with different slope profiles utilised to mitigate dynamic response of structure." at: 11th Structural Engineering Convention (SEC-2018), 19-21 Dec. 2018, Jadavpur University, India.
(18) S. Upadhyaya, B. Nanda, R.K. Panigrahi (2018). “Study on flexural behaviour RC beams made using sand partially replaced by granite dust.” at: 11th Structural Engineering Convention (SEC-2018), 19-21 Dec. 2018, Jadavpur University, India.
(19) S. Upadhyaya, R.K. Panigrahi, B. Nanda (2018). “Experimental analysis of partial replacement of fine aggregate by granite dust in concrete.” at: International Conference on Sustainable Construction and Building Materials (SCBM 2018), 18-22 Jun. 2018, National Institute of Technology, Surathkal.
(20) G.R. Patil, K.D. Singh, B. Nanda (2017). “A study on sloped bottom tuned liquid damper for controlling dynamic response of buildings.” at: 13th International conference on vibration problems (ICOVP), 29 Nov. – 02 Dec. 2017, Indian Institute of Technology, Guwahati.
(21) G.R. Patil, K.D. Singh, B. Nanda (2016). “Evaluation of slopped bottom tuned liquid damper for mitigation of dynamic response of structure.” at: 9th Structural Engineering Convention (SEC 2016), 21-23 Dec. 2016, CSIR- SERC, Chennai.
(22) B. Nanda, K.C. Biswal (2015). “Tuned liquid damper for controlling structural vibration: A review”, at: Recent Advances in Structural Engineering (RACE 2015), 7-8 Nov. 2015, Veer Surendra Sai University of Technology, Burla, Odisha.
(23) Jebieshia T.R., B. Nanda, D.K. Maiti, D. Maity (2014). “Free Vibration Characteristics and Damage Assessment of Composite Structures.” at: International Conference on Theoretical, Applied, Experimental and Computational Mechanics (ICTACEM 2014). 29-31 Dec. 2014, Indian Institute of Technology, Kharagpur.
(24) B. Nanda, R. Anand, D.K. Maiti (2014). “Frequency based Inverse Damage Assessment Technique using Novel Hybrid Neuro-Particle Swarm Optimization.” at: International Conference on Computational Intelligence in Data Mining (ICCIDM-2014). 20-21 Dec. 2014, Veer Surendra Sai University of Technology, Burla.
(25) B. Nanda, Jebieshia T.R., D.K. Maiti, D. Maity (2014). “Damage Assessment of Composite Structures from Changes in Natural Frequency using Unified Particle Swarm Optimization.” at: 5th International Congress on Computational Mechanics and Simulation (ICCMS-2014). 10-13 Dec. 2014, Structural Engineering Research Center, Chennai.
(26) B. Nanda, K.C. Biswal (2014). “Earthquake induced structural vibration control using tuned liquid damper”, at: Recent Advances in Structural Engineering (RACE 2014), 25-26 Oct. 2014, Veer Surendra Sai University of Technology, Burla, Odisha.
(27) B. Nanda, A. Majumdar, D. Maity, D.K. Maity (2014). “Performance comparison among vibration based indicators in damage identification of structures.” at: International Mechanical Engineering Congress (IMEC- 2014). 13-15 Jun. 2014, National Institute of Technology, Tiruchirappalli.
(28) R. Bhushan, B. Nanda, D. Maity, A.K. Samanta (2014). “Structural Damage Assessment using Vibration Data and Hybrid Particle Swarm Gravitational Search Algorithm”, at: National Conference on Innovations in Design & Construction of Industrial Structures (IDCIS 2014), 3-5 Apr. 2014, National Institute of Technology, Durgapur.
(29) A. Majumdar, B. Nanda, D. Maity, D.K. Maity (2012). “Optimal Sensor Placement for Damage Detection Using Continuous Ant Colony Optimization Technique.” at: 4th International Congress on Computational Mechanics and Simulation (ICCMS 2012). 9-12 Dec. 2012, Indian Institute of Technology, Hyderabad.
(30) B. Nanda, D. Maity, D.K. Maity (2012). “Damage Assessment of Beam Structures from Change in Curvature Mode Shape using Unified Particle Swarm Optimization Technique.” at: 4th International Congress on Computational Mechanics and Simulation (ICCMS 2012). 9-12 Dec. 2012, Indian Institute of Technology, Hyderabad.
(31) A. Majumdar, B. Nanda, D. Maity, D.K. Maiti (2011). “Damage Assessment of Frame Structure using Ant Colony Optimization Technique”, at: XVII National Seminar on Aerospace Structures (NASAS 2011), 22-24 Sep. 2011, Indian Institute of Technology, Kanpur.
(32) B. Nanda, K.C. Biswal (2011). “Application of Tuned Liquid Damper for Controlling Structural Vibrations Due to Earthquake Excitations.” at: 6th International Structural Engineering and Construction Conference (ISEC 6). 21- 26 Jun. 2011, Zürich, Switzerland.
A. Text & Reference Book:
1. B. Nanda (2023),"Basic Civil Engineering." Evincepub Publishing, Bilaspur, India. ISBN: 9789356735743.
B. Book Chapters:
(1) G.R. Patil, K.D. Singh, B. Nanda, (2024). Controlling Earthquake Induced Structural Vibration with Slope Bottom Tuned Liquid Damper. In: Goel, M.D., Kumar, R., Gadve, S.S. (eds) Recent Developments in Structural Engineering, Volume 1. SEC 2023. Lecture Notes in Civil Engineering, vol 52. Springer, Singapore. https://doi.org/10.1007/978-981-99-9625-4_61
(2) A. Sikadar, J. Mishra , B. Nanda , S.K. Patro (2022),"Geopolymer Concrete as a Revolutionary Green Building Material for Modern Infrastructures." C. Baskar et al. (eds.), Encyclopedia of Green Materials. Springer, Singapor, pp. 1-9. ISBN: 9789811649219. https://doi.org/10.1007/978-981-16-4921-9_140-1.
(3) R. S. Krishna, J. Mishra , S.K. Das , B. Nanda , S.K. Patro, S.M. Mustakim (2022),"A Review on Potential of Graphene Reinforced Geopolymer Composites." K. Mukherjee et al. (eds.), Tailored Functional Materials. Springer, pp. 43-60.
(4) L. Mohanty, A. Swain, B. Nanda (2022), "Estimation of parameters in ungauged catchment using Map Correlation Method: A case study on Krishna-Godavari river basin." S. Kanga, S.K. Singh, G. Meraj, M. Farooq (Eds.), Geospatial Modeling for Environmental Management: Case Studies from South Asia (1st ed.) CRC Press. https://doi.org/10.1201/9781003147107-3.
(5) J. Mishra, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim (2022), "Strength Development in Ferrochrome Ash-Based Geopolymer Concrete." In: S.K. Ghosh, S.K. Ghosh, B.G. Mohapatra, R.L. Mersky (Eds), Circular Economy in the Construction Industry. ISBN: 9781003217619, CRC Press, Boca Raton, Florida, pp. 175-184. https://doi.org/10.1201/9781003217619.
(6) S. Upadhyaya, B. Nanda, R.K. Panigrahi (2018). “Experimental analysis of partial replacement of fine aggregate by granite dust in concrete.” In: B. Das, N. Neithalath (Eds), Sustainable Construction and Building Materials. ISBN: 9789811333163, Lecture Notes in Civil Engineering, vol 25. Springer, Singapore, pp. 335-344. https://doi.org/10.1007/978-981-13-3317-0_31.
(7) B. Nanda, K.C. Biswal (2015). “A Review on Applications of Tuned Liquid Dampers in Vibration Control.” In: C.R. Mohanty, S.K. Panigrahi (Eds.), Advances in Civil Engineering. ISBN: 9789352356850, Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, pp. 183-200.
(8) B. Nanda, R Anand, DK Maiti (2015). “Frequency Based Inverse Damage Assessment Technique Using Novel Hybrid Neuro-particle Swarm Optimization.” In: L. Jain, H. Behera, J. Mandal, D. Mohapatra, (Eds.), Computational Intelligence in Data Mining - Volume 3. ISBN: 9788132222019, Springer, Germany, pp. 617-626. https://doi.org/10.1007/978-81-322-2202-6_56
(9) B. Nanda, T. R. Jebieshia, D.K. Maiti and D. Maity (2014). “Damage Assessment of Composite Structures From Changes in Natural Frequency Using Unified Particle Swarm Optimization.” In: N.R. Iyer, G.S. Palani and T. Kant (Eds.), Proceedings of ICCMS 2014 5th International Congress on Computational Mechanics and Simulation. ISBN: 9789810911393, Research Publishing, Singapore, pp. 944-953. https://doi.org/10.3850/978-981-09-1139-3_231
(10) B Nanda, A. Majumdar, D Maity, D.K. Maiti (2014). “Performance comparison among vibration based indicators in damage identification of structures.” In: K.R. Balasubramanian, S.P. Sivapirakasam and R. Anand (Eds.), Dynamics of Machines and Mechanisms, Industrial Research. ISBN: 9783038351634, Trans Tech Publications, Switzerland, pp. 2081-2085.
(11) B. Nanda, K.C. Biswal (2011). “Application of tuned liquid damper for controlling structural vibration due to earthquake excitation.” In: S.O. Cheung, S. Yazdani, N. Ghafoori, A. Singh (Eds.), Modern Methods and Advances in Structural Engineering and Construction. ISBN: 9810879202, Research Publishing, Singapore, pp. 983-987.
FDP/STTP/Workshop Organized:
1. Coordinator, UGC-UKIERI Sponsored workshop on Recent Advances in Strengthening of Concrete Structures (RASCS 2019)”, 9th Mar. 2019. Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla.
2. Coordinator, QIP sponsored one-week short term course on Advanced Materials and Techniques for Reinforced Concrete Structures (AMTRCS 2017), 27 Mar. - 01 Apr. 2017. Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla.
3. Co-convener, International Conference on Recent Advances in mechanics and materials (ICRAMM-2016), 17-18, Dec. 2016. Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla.
16. Vetting of Structural Plan, Design and Detailing of Multi-Storey Residential Apartment (Phase VI and VII) at Dumduma, Bhubaneswar. Consultants: A.N. Nayak, S.K. Patro, R.K. Panigrahi, B. Nanda. Funding Agency: Odisha State Housing Board, Bhubaneswar. 2016-2017. Project cost: INR. 733,530.
15. Vetting of Structural Plan and Design of Multi-Storey Residential Building at Angul Town. Consultants: A.N. Nayak, S.K. Patro, R.K. Panigrahi, B. Nanda. Funding Agency: Odisha State Housing Board, Bhubaneswar. 2017- 2019. Project cost: INR. 510,520.
14. Proof checking and Vetting of Structural Design and Drawing of Proposed Composite Office Building for Sambalpur Municipality Corporation and Sambalpur Development Authority, Consultants: S.K. Patro, B. Nanda. Funding Agency: Sambalpur Municipality Corporation, Sambalpur. 2017-2018. Project cost: INR. 97,000.
13. Vetting of Structural design for construction of 28-E Type Qtrs. for Reserve Office, Sambalpur. Consultants: A.N. Nayak, S.K. Patro, B. Nanda. Funding Agency: Odisha Police Housing Welfare Corporation, Sambalpur, 2018- 2019. Project cost: INR. 104,928.
12. Vetting of Drawings and Design for Improvement of Water Supply to Burla Town (Balance work). Consultants: S.K. Patro, B. Nanda. Funding Agency: Public Health Division, Sambalpur, Govt. of Odisha, 2017-2019. Project cost: INR. 255,000.
11. Vetting of Drawings and Design for Improvement of Water Supply to Padampur Town. Consultants: S.K. Patro, B. Nanda. Funding Agency: Public Health Division, Sambalpur, Govt. of Odisha, 2017-2019. Project cost: INR. 2,70,000
10. Vetting of structural plan, design and detailing of multi-storey residential apartment building at Ranasinghpur, Bhubaneswar. Consultants: A.N. Nayak, S.K. Patro, R.K. Panigrahi, B. Nanda. Funding Agency: Odisha State Housing Board, Bhubaneswar. 2018-2019. Project cost: INR. 11,90,827.
9. Condition Assessment and Checking of Adequacy of RCC Columns and Beams of Ash Storage Silos in Captive Power Plant at Hindalco Industries Limited, Hirakud. Consultants: A.N. Nayak, S.K. Patro, B. Nanda. Funding Agency: Hindalco Industries Limited, Hirakud, 2019. Project cost: INR. 610,000.
8. Vetting of drawing and design for proposed residential omplex over plot No-498/100, 498/320, 498/321, 498/61, Mouza Nuahat, Cuttack Sadar 273, Cuttack. Consultants: B. Nanda, S.K. Patro. Funding Agency: Director, GM lnfratech Limited, Kolkata (WB). 2019-2020. Project cost: INR. 2,30,100.
7. Vetting of design and drawing of Godown at Chhtarpur, and Structural design for D type Quarter at Rengali Training Hostel, Bhubaneswar. Consultants: S.K. Patro, B. Nanda. Funding Agency: M/s: Preetech architects and engineers, Bhubaneswar. 2021-2022. Project cost: INR. 1,41,600.
6. Vetting of structural design and drawings of district head quarter hospitals at Deogarh, Jeypore, Bhadrakh, and Sonepur. Consultants: S.K. Patro, B. Nanda. Funding Agency: M/s: Preetech architects and engineers, Bhubaneswar. 2021-2022. Project cost: INR. 12,10,444.
5. Vetting of structural design for G+4 STPI Building at Rourkela. Consultants: S.K. Patro, B. Nanda. Funding Agency: Additional Director, STPI, Bhubaneswar, 2022-2023. Project cost: INR. 1,18,000.
4. Vetting of drawing for Foundry structure rehabilitation job at Balco, Chattisgarh. Consultants: S.K. Patro, B. Nanda. Funding Agency: Ms: Indifab projects Ltd., Angul, 2022-2023. Project cost: INR. 5,90,000.
3. Vetting of design and drawing of construction of 300 Seated Town Hall cum Auditorium at Bijepur NAC. Consultants: S.K. Patro, B. Nanda. Funding Agency: Executive Engineer, Bijepur NAC, Bargarh. 2022-2023. Project cost: INR. 1,77,000.
2. Vetting of structural design and drawings for 2 Nos. of S+7 MIG apartment buildings as senior living homes at plot no. 204, Khata no. 208/82, Mouza: baghua, Tahsil: Kantapada, Cuttack, Consultants: B. Nanda, S.K. Patro. Agency: Ms. Tamanna Senior Living Homes Pvt. Ltd., Bhubaneswar. 2022-2023. Project Cost INR. 5,69,940.
1. Vetting of structural design and drawings under the project “Development of Maa Samaleswari Temple Area Under Samalei Plan at Sambalpur. Consultants: B. Nanda, S.K. Patro, and A.N. Nayak. 2022-2023. Project Cost: INR. 10,62,000.